Media Funnel – Small


The Media Funnel is a key component to the Trash Can Hopper™ Pressure Washer Blast System.  The media funnel – small is designed to fit standard sized 5 gallon buckets and is placed at the bottom center of the bucket.  It can be used with or without the media carburetor.  When used with the media carburetor, the funnel slips over the 4” raised cylindrical seat which keeps it centered around the media carburetor and in the bucket.

The media funnel is adjustable.  This feature is important because as the media is poured into the funnel, the funnel is allowed to expand against the sides of the bucket which creates a tighter seal than would occur if the funnel was of a fixed top diameter.

The funnel is made from heavy duty, industrial, chemical resistant, high density flexible plastic making it resistant to salts, sand, and other types of media.  The slope of the funnel allows the media to slip downward with the pull of media carburetor air flow and gravity.  The funnel greatly improves media flow.


  • (1) Media Funnel – 5 Gallon
  • Bottom Diameter – 4 ½”
  • Top Diameter – 11”

How it works:

The media funnel™ and media carburetor™ work together to create a strong push – pull suction on the media which is lifted out of the trash can hopper™ and into the media hose where it is mixed with the pressure washer’s jet stream.  The venturi driven brass lance attachment pulls the media from the bucket while the ShopVac blower drives air into the media carburetor.  The result is an air / media mixture that is blown up and into the sand stake and media hose.  This push –pull suction creates a powerful, smooth, and controllable flow of media into the pressure washer’s jet stream allowing the user to clean, strip, and degrease pool tile, fountains, concrete, stone, and other surfaces.

NOTE: Pressure Washer (3500psi/3.5GPM minimum) and Vacuum/Blower are not included.

Additional information

Weight 2 lbs
Dimensions 12 × 12 × 12 in
Primary Use