Mr. Hard Water® Electric Buffer Polishing Compound – 32 oz.
- Additional information
Mr Hard Water® Auto Windshield Electric Buffer Polishing Compound
Mr Hard Water® Auto Windshield Electric Buffer Polishing Compound is superior to cerium oxide and is comprised of 1300 nm polishing particles (50 times smaller than powder abrasives) fully suspended in deionized water, making it ready-to-use. Simply spray onto the glass or polishing pad and you’re ready to polish away light swirl marks, hard water stains, and light etching. Mr Hard Water® Auto Windshield Electric Buffer Polishing Compound is an eco-friendly, all natural compound that is safe, effective, and easy-to-use. It is specifically designed for windshield glass polishing. It’s also ideal for sensitive glass windshield surfaces that react poorly to powder based cleaners. Apply by hand or with a polisher. Mr Hard Water® Auto Windshield Electric Buffer Polishing Compound can be used with many different types of polishing pads, including steel wool, nylon, and white pads. It can also be used on the second polishing pass, removing any glass defects generated by more aggressive cleaners and compounds. To maximize the use of the material, re-wet with water from a spray bottle as the liquid dries.
- Readu tp use. No mixing required.
- Superior to cerium oxide.
- Polishing particles optimized for glass – lenses, telecopes, and eyewear.
- Particle size is 50 times smaller than powder abrasives. For glass surfaces sensitive to powder abrasives.
- Also removes light swirl marks, light haze, AND light etching.
- High coverage rates.
- Ready to use – no mixing required.
- Safe on metals, stone, and surrounding surfaces.
- Ideal for Auto windshields, RV windshields, and Bus windshields.
Directions for use: Shake well. Test in an inconspicuous place. Do not dilute or mix.
Hand Application: 1. Apply with a soft cloth or microfiber towel and polish in a circular motion. 2. Let dry to a dust and wipe away, or rinse with water. 3. Apply Mr Hard Water® Windshield Glass Sealer. Polishers: 1. Spray 2- 3 squirts onto the glass windshield. 2. Spray 1-2 squirts onto a soft non-abrasive polishing pad. 3. Polish on low speed (<500 RPM). 4. When material begins to dry to a dust during polishing, re-wet with water from a spray bottle. 5 Reapply compound as needed until desired result is achieved. 6. Let dry and wipe away, or rinse with water. 6. Apply Mr Hard Water® Windshield Glass Sealer. POLISHING PADS: For best polishing results, use a Mr Hard Water® – Blue Nylon Polishing Pad for light to medium stains. For tough stains, use a Mr Hard Water® super fine #0000 steel wool polishing pad. NOTE: Not recommend on plastics, or glass / plastic composites. Do not over polish. Always follow windshield manufacturer’s maintenance instructions.
Coverage Rates (sq ft.)
NOTE: Coverage rates depend upon degree of damage, desired result, and glass condition.
|Dimensions||0.4 × 4 × 10 in|